Configure MBR and GPT Disks

When you try to set up a new disk, you will be presented with two options to select from. They are MBR and GPT disk format.

We will see the comparison between the two below to understand the characteristics better.

Master Boot Record (MBR)	GUID partition Table (GPT)
It uses partition table in the first sector of the disk to describe the location of disk partitions.	Uses extensible firmware interface to store partition information with redundancy.
Supports disks up to 2 TB.	Supports disks more than 2 TB.
Four primary partitions or three primary partitions plus one extended partition.	Not all previous versions of Windows can recognize GPT disks.

Now you will be presented with the above two options that we spoke of.

Let us say that you want to convert the disk type from MBR to GPT. You can do so from the diskpart utility.

Open a PowerShell console and type the below command.

diskpart
list disk
select Disk 1
convert gpt

Configure Basic and Dynamic Disks

We will see the differences between Basic and Dynamic Disks in the table below.

Basic Volumes	Dynamic Volumes
These type of Disks are in existence from the time of MS-DOS.	Dynamic disks support spanned, striped, mirrored and RAID-5 volumes.
Basic Volumes are used as a common configuration for most of the disks even today.	Dynamic disks support an unlimited number of volumes, unlike basic disks.
They can be extended only to adjacent, unallocated space on the same disk.	Spanned volumes can extend across multiple disks.
Always better to start as a basic disk type.	Not always the best choice.

You can convert the disk to Dynamic by right clicking the disk from the computer Management snap-in.

Manage Volumes

A dynamic disk can contain an unlimited number of volumes that function much like primary partitions on a basic disk.

When you create a volume on a dynamic disk by using the Disk Management snap-in in Windows Server.

There are five-volume types:

1. Simple Volume: Most basic type of volume and can be created and used only on one physical disk.

2. Spanned Volume: Spanned Volume can combine two or more physical disks and allow you to create a volume larger than a single physical disk on your system the requirement is that this can work only on Dynamic disks.

The disadvantage of spanned volume is that one of the disks fail, all the data is lost.

3. Stripped Volume: Like spanned volume, they can combine two or more disks. The data stored on these disks is stripped, which means when writing data on the drives, it is written equally on both the drives. It is commonly known as RAID 0.

The disadvantage of these type of disk is that they don’t have any redundancy.

4. Mirrored Volume: Combines two disks that are duplicate of each other. It is commonly known as RAID 1. It has redundancy as there are two copies of the same data.

5. RAID: It stands for Redundant Array of Independent Disks. There are different levels of RAID and all of them provide redundancy and data protection with the exception of RAID 0.

Create and Mount VHDs

Hyper-V relies on the virtual hard disk (VHD or VHDX) format to store virtual disk data in files that can easily be transferred from one computer to another.

The Disk Management snap-in in Windows Server 2016 enables you to create VHD and VHDX files and mount them on the computer.

To create a VHD in Disk Management, use the following procedure.

➝ Go to Server Manager.

➝ Click on Tools.

➝ Click on Computer Management.

➝ The Computer Management console opens.

➝ Click Disk Management to open the Disk Management snap-in.

From the action menu, click on Create VHD.

Design Storage Spaces.

Windows Server 2016 includes a disk virtualization technology called Storage spaces, which enables a server to add storage space from individual disks and attach that space to create virtual disks of any size supported by the hardware.

This virtualization feature is often associated with SAN and NAS, which require huge investments and administrative skills.

Storage spaces provide similar capabilities by using Standard Direct-attached disk drives or single external “Just a Bunch of disks” (JBOD) arrays.

Storage spaces use unallocated disk spaces on server drives to create storage pools.

A storage pool can span multiple drives, giving the administrators the freedom to add or remove disks as per the requirement. By using storage pool, administrators can create virtual disks of any size.

Once created, virtual disks would act like physical disks, just that the actual data would be stored on one of the physical disks.

After creating a virtual disk, you can create volumes on it just as you would on a physical disk.

Just to make this easier to understand, I have created a visual presentation of the entire concept below.

The blue drives below are the physical disks. The green boxes are the Virtual disks and you can see the volumes created inside of it.

Configure Storage Pools and Disk Pools

In this part, we will see how to add the Storage Pools and create virtual disks.

To create a storage pool by using Server Manager > File and Storage Services > Storage Pools > add Tasks > New Storage Pool

Give the storage pool a name, in our case I am giving it Test Pool. Next you will be presented with an option to select the Physical that are directly attached to the server.

Click on Next and then create.

Once done, you will be presented with completion wizard which will show the results. Click on the checkbox which reads Create a virtual disk once this wizard closes to create our Virtual Disks.

Next up, you will see the New Virtual Disk wizard, select the Storage Pool “Test Pool” we just created and provide an appropriate Virtual Disk name.

You are then presented with the type of disk that you want to create. Below are the following options.

Simple: Requires the pool to contain at least one physical disk and provides no fault tolerance. When more than one physical disk is available, the system stripes data across the disks.

Mirror: Requires the pool to contain at least two physical disks and provides fault tolerance by storing identical copies of every file. Two physical disks provide protection against a single disk failure; five physical disks provide protection against two disk failures.